ASME

ASME A112.19.2:2008 pdf download

ASME A112.19.2:2008 pdf download.Ceramic plumbing fixtures. 8.6.3 Report Static pressure, main and total flush volume, and aftertlow (if any) shall be reported in a format similar to that of Figure A.8. The report shall also indicate whethe...

ASME 2022-09-26 1

ASME A112.19.1:2008 pdf download

ASME A112.19.1:2008 pdf download.Enamelled cast iron and enamelled steel plumbing fixtures. Finish - the texture and condition of a surface (excluding colour). Fitting — a device that controls and guiies the flow of water. Note: S-e ASME...

ASME 2022-09-26 1

ASME A112.18.9:2011 pdf download

ASME A112.18.9:2011 pdf download.Protectors/lnsulators for Exposed Wasteand Supplies on Accessible Fixtures. 4.4 Water Resistance Protectors/ insulators for esposed waste and supplies shall meet the waler resistance requirements contained i...

ASME 2022-09-26 1

ASME A112.1.2:2004 pdf download

ASME A112.1.2:2004 pdf download.Air Gaps in Plumbing Systems(For Plumbing Fixturesand Water-Connected Receptors). 1.5 Definitions air gap: a vertical distance through the atmosphere between the lowest potable water outlet and the highest le...

ASME 2022-09-26 1

ASMEA112.19.14:2006 pdf download

ASMEA112.19.14:2006 pdf download.Six-Liter Water Closets Equipped With a Dual Flushing Device. 2 REQUIREMENTS 2.1 Operation The dual flush mechanism shall function by actuation and release of the selector control, switch, or handle and shal...

ASME 2022-09-26 1

ASME A90.1:2003 pdf download

ASME A90.1:2003 pdf download.SAFETY STANDARD FOR BELTMANLIFTS. 4.3 Landings 4.3.1 VertIcal Clearance. The clearance between the floor or mounting platform and the lower edge for the underfloor hood above it required by para 4.4 shall be rio...

ASME 2022-09-26 1

ASME A18.1:2005 df download

ASME A18.1:2005 df download.Safety Standard for Platform Lifts and Stairway Chairlifts. 2.82.3 Safety-rope drums, leading sheaves, and their supporting brackets and safety-jaw gibs shall be permitted to be made of cast iron and other metals...

ASME 2022-09-26 1

ASME A17.8:2016 pdf download

ASME A17.8:2016 pdf download.Standard for wind turbine tower elevators. Hoistway enclosure — the fixed structure consisting of vertical walls or partitions that isolates the hoistway from all other areas or from an adjacent hoistway and i...

ASME 2022-09-26 1

ASMEA17.6:2017 pdf download

ASMEA17.6:2017 pdf download.Standard for Elevator Suspension, Compensation, and Governor Systems. 13.1.3.4 Strand Type and Constructions: ParaLLel Lay. Strand that contains at least two layers of wires all of which are laid in one operation...

ASME 2022-09-26 1