ASME A112.18.6:2017 pdf download.Flexible water connectors. 4.2.1 Copper alloy components shall contain at least 56% copper. 4.2.2 Stainless steel components in contact with water shall be made from 300 or 400 series stainless steel.Ferrous...
ASME 2022-09-26 1
ASME A112.18.3:2002 pdf download.PERFORMANCE REQUIREMENTSFOR BACKFLOW PROTECTIONDFVICES AND SYSTEMS INPLUMBING FIXTURE FITTINCS. 7.3 Conformance Any physical damage to internal devices known to preclude functional performance shall be cause...
ASME 2022-09-26 1
ASME A112.18.2:2020 pdf download.Plumbing waste fittings. a) ABS for fittings and mechanical joints: cell classification 20211 in ASTM D3965; b) ABS for tubes: cell classification 42222 in ASTM 03965; c) reinforced PP: cell classification P...
ASME 2022-09-26 1
ASME A112.18.2:2005 pdf download.Plumbing waste fittings. 4.1.4 Materials for ABS or PVC DWV ptastk pipe and pipe fittings shall comply with one of the following Standards: (a) ASTM D 2661; (b) ASTM D 2665; (c) ASTM F 628; (d) ASJMF891; (e)...
ASME 2022-09-26 1
ASME A112.18.1:20121 pdf download.Plumbing supply fittings. 4.4.3.2 Fittings with non-standard threads for aerators or other end point devices may be used. 4.4.4 Hand-held shower connection threads shall be 1/2-14 NPSM or lSO 228-G 1/2 B (s...
ASME 2022-09-26 1
ASME A112.18.1:2005 pdf download.Plumbing supply fittings. 4.14 Materials Coupling nuts, locknuts, and spout-holding nuts shall be made from the following materials: (a)copper alloys with a minimum copper content of 56%; (b)stainless steell...
ASME 2022-09-26 1
ASME A112.14.6:2006 pdf download.FOG (Fats, Oils,and Greases)Disposal Systems. 33 Maintenance and Operation Documentation Each FOG disposal system shall be provided with maintenance and operation documentation, which include a troubleshooti...
ASME 2022-09-26 1
ASME A112.14.4:2001 pdf download.GREASE REMOVAL DEVICES. 1.4 Definition removal device (GRD): a plumbing appliance that is installed in the sanitary drainage system in order to intercept free-floating fats, oils, and grease from waste water...
ASME 2022-09-26 1
ASME A112.14.3:2018 pdf download.Hydromechanical Grease Interceptors. (b) For flow rates upto and IncludIng 50 gpm (189 LI mm) the test sinks shall be 50 gal (189 1) and have the following Inside dimensions: 8 ft (2.44 m) in length, 2 ft (0...
ASME 2022-09-26 1
ASME A112.14.3:2000:2021 pdf download.GREASE INTERCEPTORS. These motions shall be so regulated as to have the baffle submerged to within I in. (25 mm) of its top by the time it reaches the end of the last 2 in. (50 mm) of horizontal travel....
ASME 2022-09-26 1