ASME B16.20:2012 pdf download.Metallic Gaskets for Pipe Flanges. The distance of the first weld from the terminal weld shall be no greater than 38 mm (1.5 in.). Up to four additional loose preformed metal windings beyond the terminal weld m...
ASME 2022-09-27 1
ASME B16.20:1998 pdf download.METALLIC GASKETS FOR PIPE FLANGES. 4.2 Design 4.2.1 General. Jacketed gaskets shall be made with a filler material enclosed in a metal jacket. 4.2.2 Jacket Thickness. The jacket metal thickness shall be a minim...
ASME 2022-09-27 1
ASME B16.18:2021 pdf download.Cast Copper Alloy Solder Joint Pressure Fittings. 5 MARKING Each fitting shall be permanently marked with the manufacturer’s name or trademark and other applicable markings as required by MSS SP-25. Marking o...
ASME 2022-09-27 1
ASME B16.15:2018 pdf download.Cast Copper Alloy Threaded Fittings Classes 125 and 250. 2.5 Time of Purchase, Manufacture, or InstaLLation The pressure—temperature ratings in this Standard are applicable upon its publication to all fitting...
ASME 2022-09-27 1
ASME B16.15:2006 pdf download.Cast Copper Alloy Threaded Fittings Classes 125 and 250. 6 THREADING 6.1 Types of Threads All pipe fittings shall be threaded with ANSI/ ASME 131.20.1 general purpose pipe threads and shall have taper threads....
ASME 2022-09-27 1
ASME A13.1:2020 pdf download.Scheme for the ldentification of Piping Systems. Legends shall be applied dose to valves or flanges; adjacent to changes In direction, branches, and where pipes pass through walls or floors; and at intervals on...
ASME 2022-09-27 1
ASME B16.14:2013 pdf download.Ferrous Pipe Plugs,Bushings, and Locknuts With Pipe Threads. 8.1.2 ALignment. The maximum allowable variation in the alignment of threads of all openings shall be 5.0 mm/m (0.06 in./ft). 8.1.3 Internal Threadin...
ASME 2022-09-27 1
ASME B16.12:2009 pdf download.Cast Iron Threaded Drainage Fittings. 1.2 Applicability This Standard covers fittings intended fur use in gravity drainage systems subject only to the gravity head of waste liquids at temperatures from ambient...
ASME 2022-09-27 1
ASME B16.18:2012 pdf download.Cast Copper Alloy Solder Joint Pressure Fittings. 8.3 Ovatity Maximum ovality shall not exceed 1% of the maximum diameters shown in Table 3 or Table 1-3. The average of the maximum and minimum diameters must be...
ASME 2022-09-27 1
ASME B16.11:2016 pdf download.Forged Fittings,Socket-Welding and Threaded. Tables 1 through 6 show fittings dimensional requirements in millimeters. Tables I-I through 1-6 show the dimensional requirements for Inch dimensioned fittings. 2 P...
ASME 2022-09-27 1