Abstract： AS ISO 6302:2021 pdf download.Earth-moving machinery - Drain, fill and level plugs. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International Standar...

AS ISO 6302:2021 pdf download.Earth-moving machinery - Drain, fill and level plugs.

2 Normative references

The following standards contain provisions which, through reference in this text, constitute provisions of this International

Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to

agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.

ISO 7-1:1982, Pipe threads where pressure-tight joints are made on the threads — Part 1: Designation, dimensions and tolerances.

ISO 261:1973, ISO general purpose metric screw threads — General plan.

ISO 263:1973, ISO inch screw threads — General plan and selection for screws, bolts and nuts — Diameter range 0.06 to 6 in.

ISO 724: 1993, ISO general-purpose metric screw threads — Basic dimensions. ISO 725:1978, 150 inch screw threads — Basic

dimensions.

ISO 4510-1:1987, Earth-moving machinery — Service tools — Part 1: Common maintenance and adjustment tools.

Recommended：