Abstract： AS 5034:2005 pdf download.lnstallation and use of inert gases for beverage dispensing. 1.3.15 Pressurized beverage storage vessel A dispensing application where the beverage is held in a keg pressurized with an inert gas or gas mixture to m...

AS 5034:2005 pdf download.lnstallation and use of inert gases for beverage dispensing.

1.3.15 Pressurized beverage storage vessel

A dispensing application where the beverage is held in a keg pressurized with an inert gas or gas mixture to maintain carbonation, and where the incrt gas or gas mixture also provides the pressure to transfer the beverage to the dispensing valves. The beverage may be beer or other ready to drink beverage in kegs.

1.3.16 Ready to drink (pre-mix)

A dispensing application for beverages which mixes in a tank a syrup with water containing carbon dioxide dissolved tinder pressure before piping it by action of the carbon dioxide pressure to the dispensing valve.

1.3.17 Refrigerated liquid CO supply

An inch gas supply system consisting of a refrigerated liquid CO2 storage tank, vaporizer and control equipment intended to supply CO2 gas to a distribution system according to this Standard.

NOTE: In this Standard, cryogenic storage vessels are included in this definition.

1.3.18 Regulator hoard

Part of a distribution system consisting of two or more pressure regulators with high pressure supply and where each regulator

supplies its own regulated low pressure pipe system.

1.3.19 Shall

Indicates that a statement is mandatory,

1.3.20 Should

Indicates a recommendation.

1.3.21 Single cylinder supply

An inert gas supply system consisting of a single compressed gas cylinder and control equipment intended to supply a distribution

system according to this Standard.

Recommended：