Abstract： AS/NZS 2161.2:2005 pdf download.Occupational protective gloves Part 2: General requirements. 3.5 dexterity manipulative ability to perform a task 3.6 hazard situation which can be the cause of any harm Or damage to the health of the human b...

AS/NZS 2161.2:2005 pdf download.Occupational protective gloves Part 2: General requirements.

3.5

dexterity

manipulative ability to perform a task

3.6

hazard

situation which can be the cause of any harm Or damage to the health of the human body. A non exhaustive list of specific standards dealing with hazards is given in the Bibliography

level of performance

numijer trial designates a particular category or range of performance by whicn the results ol testing can be qraded

The level of performance is determined by the result of the corresponding test as described in the specific standards referred to

in the Bibliography. A high level number corresponds to a high level of performance.

Levels of performance are based upon the results of laboratory tests, which do not necessarily reflect actual conditions in the

workplace.

4 General requirements

4.1 Glove design and construction — General

The protective glove shall be designed and manufactured so that in the foreseeable conditions of use for which it is intended, the user can perform the hazard related activity normally whilst enloying appropriate protection at the highest possible level.

II required. the glove shall be designed to minimize the time needed for putting on and taking off.

When the glove construction includes seams, the material arid strength of the seams shall be such that the overall performance of

the glove is not significantly decreased. Where relevant, test methods and requirements are specified in the specific standards

listed in the Bibliography.

Recommended：