ASME B18.12:2020 pdf download.Glossary of Terms for Mechanical Fasteners. 2.1.8 MechanicaL Properties mechanical properties: the properties of a fastener in reaction to applied loads. The mechanical properties of the fastener are rarely tho...
ASME 2022-09-27 1
ASME B18.10:2006 pdf download.Track Bolts and Nuts. 2.3 Body Diameters This Standard prov ides for two styles of body diameters. Bolts shall be provided with a full size body in accordance with the respective table dimensioas of Table 1 or...
ASME 2022-09-27 1
ASME B18.8.2:2020 pdf download.Taper Pins,Dowel Pins,Straight Pins, Grooved Pins, and Spring Pins(lnch Series). 2.1.2.3 Unhardened Ground DoweL Pins. This variety of dowel pin shall have ground cylindrical sides with both ends chamfered. Di...
ASME 2022-09-27 1
ASME B18.8.1:2014 pdf download.Clevis Pins and Cotter Pins(Inch Series). 2.9 Clevls Pin Marking Case hardened pins shall be marked with a capital “H’ located in the center of the top of the head. The manufacturer’s identification mark...
ASME 2022-09-27 1
ASME B18.7:2007 pdf download.General Purpose Semi-Tubular Rivets, Full Tubular Rivets,Split Rivets, and End Caps. 2.6 FInish Unless otherwise specified, rivets shall be supplied with a natural (as processed) finish, unpiated or uncoated. Ri...
ASME 2022-09-27 1
ASME B18.6.3:2003 pdf download.Machine Screws and Machine Screw Nuts. 1.2.4 Flat and Oval Countersunk Thm Heads. Flat and oval countersunk trim heads are similar to the 82 deg flat and oval countersunk heads except that the size of head for...
ASME 2022-09-27 1
ASME B18.6.2:2020 pdf download.Square Head Set Screws and Slotted Headless Set Screws(Inch Series). 2.1.3 Head True Position. The axis of the head shall be located at true position within a tolerance zone having a diameter equal to 6% of th...
ASME 2022-09-27 1
ASME A13.1:2015 pdf download.Scheme for the Identification of Piping Systems. 3.4 Type and Size of Letters Contrast shall be provided between coloi field and legend for wdahilitv. Use of letters of standard style.2 in sizes in. (13 mm) and...
ASME 2022-09-27 1
ASME B18.2.2:2022 pdf download.Nuts for General Applications: MachineScrew Nuts; and Hex,Square,Hex Flange,and Coupling Nuts(lnch Series). GENERAL NOTES: (a) For additional requirements, refer to sectIon 3. (b) concentricity of Topped hole....
ASME 2022-09-27 1
ASME B18.2.2:2015 pdf download.Nuts for General pplications: MachineScrew Nuts, Hex, Square, Hex Flange,and Coupling Nuts(1nch Series). 3.8.2 Square Nuts. Theaxueof tapped hole in square nuts shall be located at true position with respect t...
ASME 2022-09-27 1