Abstract： AS/NZS 3629.1:2010 pdf download.Methods of testing child restraints Method 1: Dynamic testing. (I) Install the test seat onto the test rig in the orientation to simulate the rearward test mode. (ii) A high speed camera as specified in Claus...

AS/NZS 3629.1:2010 pdf download.Methods of testing child restraints Method 1: Dynamic testing.

(I) Install the test seat onto the test rig in the orientation to simulate the rearward test mode.

(ii) A high speed camera as specified in Clause 7(m) is required. If mounts are required, install the appropriate camera mounts,

i.e. rear on-hoard mounted camera for Type A mode.

(iii) Use the seatbelt anchorage locations as shown in Figure I. (iv) (Jse the upper anchorage point as shown in Figure 1.

(c) Sidewavx—Wiihoui door xlruclure The following shall apply:

(i) Install the test seat onto the test rig in the orientation to simulate the sideways test mode.

(ii) A high speed camera as specified in Clause 7(m) is required.

(iii) Use the seatbelt anchorage locations as shown in Figure I.

(iv) Use the upper anchorage point as shown in Figure I.

(d) Sideways— Wiih door .slrucIure The follow iii g shall apply:

(i) Install the test seat onto the test rig in the orientation to simulate the sideways test mode.

Recommended：