Abstract： AS/NZS 2891.5:2015 pdf download.Methods of sampling and testing asphalt Method 5: Compaction of asphalt by Marshall method and determination of stability and flow—Marshall procedure. (e) Mixing apparalus Such as steel tray, steel trowel,...

AS/NZS 2891.5:2015 pdf download.Methods of sampling and testing asphalt Method 5: Compaction of asphalt by Marshall method and

determination of stability and flow—Marshall procedure.

(e) Mixing apparalus Such as steel tray, steel trowel, spatulas and scoop.

(f) Oven Forced draught, thermostatically conrolled, capable of maintaining temperatures up to 200°C within 3°C of the set

temperature.

(g) Circular paper discs Cut to fit the mould.

(h) Specimen mould assenihlv Consisting of a mould base, a mould cylinder and an extension collar made of material that will not

deform. The mould cylinder and extension collar shall have a diameter of 101.6±0.2mm and a height suitable to produce specimens

with a conforming height. Typical dimensions of a mould assembly are shown in Figure 4.

Recommended：