Abstract： AS/NZS 1995:2003 pdf download.Welding cables. 3.2 Routine tests Tests made by the manufacturer on each manutictured length of cable to check that each length meets the specified requirements. 3.3 Sample tests lests made by the manufacturer...

AS/NZS 1995:2003 pdf download.Welding cables.

3.2 Routine tests

Tests made by the manufacturer on each manutictured length of cable to check that each length meets the specified requirements.

3.3 Sample tests

lests made by the manufacturer on samples of completed cable, or components taken from completed cable, so as to verify that the

finished product meets the design specification.

3.4 Tspe tests

lests made before supplying, on a general commercial basis, a type of cable covered by this Standard, to demonstrate satisfactory

performance characteristics that meet the intended application. These tests are of such a nature that, after they have been made,

they need not be repeated unless changes are made in the cable materials or design shich might change the performance

characteristics.

4 CONDUCTORS

The conductors shall comply with the relevant reqUirements of AS/NZS 1125 for Class 6 conductors except as modified in tlable I.

The wires may be plain or tinned. l-Iowe%er. tinned wires taken front a completed cable need not pass the continuity test for tin

plating in ASINZS 1660,1.

Recommended：