Abstract： AS/NZS 1573:1995 pdf download.Copper and copper alloys—Wire for engineering purposes. 7 FREEDOM FROM DEFECTS The wire shall be clean, smooth and free from defects detrimental to its subsequent processing and end use. If. after acceptance...

AS/NZS 1573:1995 pdf download.Copper and copper alloys—Wire for engineering purposes.

7 FREEDOM FROM DEFECTS

The wire shall be clean, smooth and free from defects detrimental to its subsequent processing and end use.

If. after acceptance of the wire and provided that it has been properly treated after delivery, subsequent processing reveals that it contains defects found to be detrimental. the wire shall be deemed not to comply with this Standard.

NOTE: Defects referred to in this Clause cannot be completely quantified. Where the presence. size or frequency of any defects is

considered to be of concern, arrangements should be made between the purchaser and the manufacturer. This may be achieved by

acceptable type samples or methods of test.

8 JOINTS There shall he no joints in the wire except those made in the base rod or wire before final drawing.

9 The dimensional tolerances for wire manufactured to the requirements of this Siandard shall conform to the limits given in Tables 4, 5, 6 and 7, as appropriate.

Recommended：