Abstract： AS 2332:2003 pdf download.slide fasteners. A slide fastener having a special fitment at the bottom end of each stringer in place of the bottom stop. so designed as to permit the two stringers to be completely separated and reassembled at wi...

AS 2332:2003 pdf download.slide fasteners.

A slide fastener having a special fitment at the bottom end of each stringer in place of the bottom stop. so designed as to permit the two stringers to be completely separated and reassembled at will when the slider is in the fully open position. The special

litnient normally consists of a pin permanently fixed to the bottom end of one stringer which fits into a box permanently fixed to the bottom end of the other stringer At both ends of separated chain there is a stopper that presents the slider from being

reinosed (refer to Figure 3(c)).

A slide fastener fitted with two sliders that operate with equal facility in either direction,

this type is available in a variety of’ forms which are illustrated in Figure 4.

4 SAFETY

It shall not be possible for the slider to come off the fastener in normal use.

5 CLASSIFICATION

Slide asleners are classified according to chain width (the width of gear elements) and by their end-use.

Slide fasteners of either the closed-end type or the open-end separable type shall be classified in accordance with the

requirements of Table I.

Table 2 specifies the minimum performance requirements for each classification.

Recommended：