AS 1544.1:2003 pdf download.Methods for impact tests on metals Part 1: lzod. The test piece is clamped vertically in supports with the notch iii the same plane as the tipper face of the support. The blow is struck on the face containing the...
AS 2022-09-30 1
AS 1472:2003 pdf download.Carbon steel spring wire for mechanical springs. 3.7 Electrodeposited zinc coating A coating of zinc of at least 98% punt), applied to the wire using a specialitcd continuous electrolytic process (see Clause 3.15 a...
AS 2022-09-30 1
AS 1428.5:2021 pdf download.Design for access and mobility Part 5: Communication for people who are deaf or hearing impaired. 1.3.23 simulated speech synthetic speech material that contains the features of speech in terms of its components,...
AS 2022-09-30 1
AS 1391:2005 pdf download.Metallic materials—Tensile testing at ambient temperature. This measurement is, in principle, valid only if the distance between the fracture and the nearest gauge mark is no less than one third of the original g...
AS 2022-09-30 1
AS 1345:1995 pdf download.ldentification of the contents of pipes, conduits and ducts. 4.1 Normally inaccessible—intimately contained within a mass of material or in an inaccessible duct or enclosure to which access cannot normally he gai...
AS 2022-09-30 1
AS 1332:2000 pdf download.Conveyor belting—Textile reinforced. Transverse piy joints shall be not less than 15 m from the ends of the belt, and at an angle between 40 degrees and 50 degrees from the longitudinal axis. The gap between ply...
AS 2022-09-30 1
AS 1301.457:2020 pdf download.Methods of test for pulp and paper Method 457: Determination of moisture content in paper, board and pulps. 5.2 Containers Containers for preventing changes in moisture content during the transporting and weigh...
AS 2022-09-30 1
AS 1301.405:2021 pdf download.Methods of test for pulp and paper Method 405: Grammage of non-creped paper and board. 5.2 Balance, sufficiently accurate, over the range of mass for which it is used, to measure the test piece mass to within 0...
AS 2022-09-30 1
AS 1289.4.4.1:2017 pdf download.Methods of testing soils for engineering purposes Method 4.4.1:Soil chemical tests— Determination of the electrical resistivity of asoil-—Method for fine granular materials. (i) Fill the remainder of the...
AS 2022-09-30 1
AS 1289.3.6.3:2020 pdf download.Methods of testing soils forengineering purposes Part 3.6.3: Soil classification tests-Determination of the particle size distribution of a soil- Standard method of fine analysis using a hydrometer. 6 Determi...
AS 2022-09-30 1