Abstract： ASME B107.36:2002 pdf download.PLIERS: LOCKING,CLAMP, AND TUBING PINCH-OFF. 4.9 Finish 4.9.1 App..rance Serfaces shall he tested in cordance with ASME l46. I Surfaces shail be free from pits, nodules. bws. and other conditions that may adve...

ASME B107.36:2002 pdf download.PLIERS: LOCKING,CLAMP, AND TUBING PINCH-OFF.

4.9 Finish

4.9.1 App..rance Serfaces shall he tested in

cordance with ASME l46. I Surfaces shail be free from pits, nodules. bws. and other conditions that may adversely affect

performance or appcaraIc. Ground surfaces shall hac a maximum swfacc rcxighness of 200 pin. (5.1 p.m) anlhmcüc average. Measurement of the finish shall be made with a m aamng insinimeal using a cutoff length ci 0.03 in, (0.8 mm).

4.9.2 Co.tIng. Coaftag shall be adherent. smouth. continuous, and free of pits, bbsiai. nodules, oxide scale, and any other

conditiom that may interfere with the presective value and the pliers Cadmium plate ihall not be allowed.

4.10 Spring

Spring shall be capable of opening the jaws to the maxünum value ci the respective clamping range minimum thmcnson as specified in the tables for the individual type aad class of pliers.

4.11 Olm.nslons

Dimensions shall be dctermincd by measxing the pliers with jaws in the closed and locked posibon. The overall length mesiuremem

shall include the adjusting screw.

4.12 Workmanship

Requirements within this Standard we intended to describe the best commercial quality pliers availe. Pliers shall conform to the

requirements of this Standard.

Recommended：