Abstract： ASME B29.200:2001 pdf download.WELDED-STEEL-TYPE MILLCHAINS,WELDED-STEEL-TYPEDRAG CHAINS, ATTACHMENTS, AND SPROCKETTEETH. (b) Test procedure. A tensile force is slowly applied, in uniaxial direction, to the ends of the chain sample. (c) The...

ASME B29.200:2001 pdf download.WELDED-STEEL-TYPE MILLCHAINS,WELDED-STEEL-TYPEDRAG CHAINS, ATTACHMENTS, AND SPROCKETTEETH.

(b) Test procedure. A tensile force is slowly applied, in uniaxial direction, to the ends of the chain sample.

(c) The tensile test is ci destructii’e test. Even though the chain may not visibly fail when subjected to the minimum ultimate

tensile force, it will have been damaged and will be unfit for service.

2.2 Measuring Load

Measuring load should be 5 times the weight of 10 ft of chain, rounded to the nearest 100 lbs.

2.3 Dimensions for Chain Links

To assure interchangeability of links as produced by different makers ot chain, standard maximum and minimum dimensions are

adopted. They are not actual dimensions used in manufacturing. hut limiting dimensions, maximum or minimum, required to asstc

desired Interchangeability. However, due to minor’ lions in barrel configurations, coupling chains o1 rent manufacture should bhe

held to a minimum.

Recommended：