Abstract： ASME B29.100:2002 pdf download.Precision Power Transmission,Double-Pitch Power Transmission, and Double-Pitch Conveyor Roller Chains,Attachments, and Sprockets. The following definitions are illustrated in Fig. 1. connecting link (cotter pi...

ASME B29.100:2002 pdf download.Precision Power Transmission,Double-Pitch Power Transmission, and Double-Pitch Conveyor Roller

Chains,Attachments, and Sprockets.

The following definitions are illustrated in Fig. 1.

connecting link (cotter pin type): an outside link consisting of a pin link plate E, two assembled pins G-G, a detachable pin link plate D, and two cotters li-H. Three types of detachable pm link plates are available; one with a slip fit, one with a degree of

press fit (drive fit), and one with a full press fit (as in conventional chain construction).

connecting link (spring clip type): a connecting link generally as described above, except that the detachable link plate is

retained by a one-piece spring clip IC that engages grooves cut in the ends of the pins.

oflet link: a link conststing of two offset link plates I-I, a bushing B, a roller C, a removable pin J, and cotter H.

offi’t section: a two-link section consisting of a roller link and an offset link, which are connected by a riveted press-fit pin.

pin link: an outside link consisting of two pin link plates E-E assembled with two pins F-F:

roller chain: a series of alternately assembled roller links and pin links in which the pins articulate inside the bushings and the rollers are free to turn on the bushings. Pins and bushings are press fit in their respective link plates. Roller chain may be

single strand, having one row of roller links, or multiple strand, having more than one row of roller links, and in which center

plates L are located between the strands of roller links. Center plates may be slip fit or press fit on the pin as agreed between

the chain manufacturer and user.

Recommended：