ASME B18.24:2004 pdf download.Part ldentifying Number (PIN)Code System Standard for B18 Fastener Products. 2 GENERAL GUIDANCE 2.1 Optional Coverage Each individual ASME 818 fastener product standard provides for optional 1318 PIN coverage u...
ASME 2022-09-29 1
ASME B18.21.3:2008 pdf download.Double Coil Helical Spring Lock Washers for Wood Structures. 2.5 CoIling Washers shall be coiled so that the gap between coils shall be such as to prevent washers from linking. The severed ends of the washers...
ASME 2022-09-29 1
ASME B1.10M:2004 pdf download.UNMIFIED MINIATURE SCREW THREADS. 1.5 AcceptablUty Additional recommended methods for determining the acceptability of miniature screw threads will be included as further expenence with this thread standard is...
ASME 2022-09-29 1
ASME B18.21.1:2009 pdf download.Washers: Helical Spring-Lock,Tooth Lock, and Plain Washers (Inch Series). 1.8 Lot For all inspections referenced in this Standard, the lot shall consist of all washers of one type, grade, style, finish, and s...
ASME 2022-09-29 1
ASME B18.21.1:1999 pdf download.LOCK WASHERS(INCH SERIES). 2.7 Processing 2.7.1 Finishes. Unless otherwise specified by the purchaser. lock washers shall be supplied with a plain (as processed) finish, not plated or coated. Where corrosion...
ASME 2022-09-29 1
ASME B18.18:2017 pdf download.Quality Assurance for Fasteners. 2.4 Acceptance and Rejection 2.4.1 Raw Material. All raw material (rod, wire, bar, or sheet) shall meet the applicable requirements. NotwonIorming raw materials shall not be use...
ASME 2022-09-29 1
ASME B18.5:2012 pdf download.Round Head Bolts(Inch Series). 1.2.7 Countersunk and Slotted Countersunk Bolts. The countersunk bolt shall have a circular head with a flat top surface and a conical bearing surface having a head angle of approx...
ASME 2022-09-29 1
ASME B18.5:2008 pdf download.Round Head Bolts(Inch Series). 2.1.3 Underhead Fillets. All bolts having flat bearing surface type heads shall have a definite fillet at the junction of head and shank. The minimum radius of fillet shall be equa...
ASME 2022-09-29 1
ASME B18.3:2012 pdf download.Socket Cap,Shoulder, Set Screws, and Hex Keys(Inch Series). (C) The conformance of screws to shank straightness or canter limitations set forth as D in Table 6 shall be checked by the use of the procedures and t...
ASME 2022-09-29 1
ASME B18.3:2012 pdf download.Socket Cap,Shoulder, Set Screws, and Hex Keys(Inch Series). (C) The conformance of screws to shank straightness or canter limitations set forth as D in Table 6 shall be checked by the use of the procedures and t...
ASME 2022-09-29 1