Abstract： ASME B5.62M:2016 pdf download.Hollow Taper Tooling With Flange-Face Contact. 1-1.4 Definitions balance: the condition in which the mass centerline and rotational centerline of a rotor are coincident. clamp set: a mechanical device for secur...

ASME B5.62M:2016 pdf download.Hollow Taper Tooling With Flange-Face Contact.

1-1.4 Definitions

balance: the condition in which the mass centerline and rotational centerline of a rotor are coincident.

clamp set: a mechanical device for securing a shank in the receiver.

data chip: a radio-frequency identification device.

drive key: a feature of a machine tool intended to orient the toolholder in the receiver and assist in delivery of the driving torque from the spindle nose to the tool.

keywciy: the part of a machine tool that receives the drive key.

receiver: the spindle or nonrotating socket of a machine. shank: a unit that fits directly into the spindle or

nonrotating socket of a machine.

spindle: component assembly of the machine tool, the function of which is to accept the basic toolholder shank.

spindle nose: that part of a spindle into which the shank is accepted.

1-1.5 FIgure Interpretation

The Part 1 figures are illustrated and labeled in accordance with ASME Y14.5.

1-2 FORMSAANDC

Form A includes provisions for automatic tool change, a data chip, an orientation notch, an access hole for manual clamping, drive keyways, and through-spindle coolant supply via coolant tube. Form C is intended for manual tool

change and includes an access hole for manual clamping, drive keyways, and through-spindle coolant supply.

Recommended：